CNC bending machine: the cold-rolled ribbed steel, hot-rolled steel bar, three disc round steel bar straightening and bending, cutting the continuous time processing of finished drawings need different specifications of stirrups, steel plate, wire rod machined directly from the stirrups, only 1 people receiving, province, province, material Province, fast. Fully automatic forming, simple and fast, no waste, high automation, greatly improve production efficiency.
The use of microcomputer control, with color touch screen and button operation, to prevent touch screen touch damage, the interface should understand, a look will be.
Numerical control bending machine: there are wire laying frame, electric wire feeding part, Horizontal Straightening part, vertical straightening part, bending part, cutting part and controlling part.
- features: straightening system: three round steel group by our factory for the production of straight machine structure, consists of 2 groups of horizontal and vertical multi wheel straightening, straightening speed, host the exclusive use of 12 active multi wheel synchronous traction bar, average pressure wheel and steel reinforced decreases. Small damage, small traction motor, small power consumption, because the vertical automatic straightening wheel drive, the resistance is small so it is easy to align, stirrup qualified rate increase, and the energy consumption, reduce the loss of steel (but the manufacturing cost of the machine will be high).
(Note: imported equipment, or imitation of imported equipment generally used only 2 active driving wheel, individual large bending hoop machine adopts 4 - 6 driving wheel and driving wheel between the horizontal and vertical wheel when driving wheel to the front feed, behind the passive vertical straightening wheel alignment of great resistance, which increase the difficulty of steel bar straightening not easy, straightening).
Features two: bending: servo motor to drive, to ensure the accuracy of bending angle. The bent arm can be rapidly rotated and stretched, and the straight and reciprocating telescopic structure makes the bending part almost free of maintenance.
- three characteristics: cut off the motor configuration system: no brake brake control device (the device is invented, I plant) all rotating bearings are used to support the design, the high frequent start stop shear, the use of more than 10 years of proven maintenance free, high speed, stable, reliable and durable, completely solve the brake shoe, brake shoe adjustment for free clearance of maintenance work.
- four characteristics: the control system: the use of advanced PLC control, color touch screen display, key input, reduce the difference caused by environmental damage to the touch screen, built-in a variety of different shapes of hoop graphics, key parts imported brand-name products, it has faults diagnosis and alarm function.
Features five: operation: to reduce the influence of the occupied space of the operating platform on the surrounding and the insecurity of the control cables on the ground. The new model designs the operating panel on the host computer. It can move around, and the machine can move easily with the site. Without installing and debugging, the machine can be put into use without the control of the cable connection and the 380V power supply.
Features six: Mobility: Mobile hoop bending machine, can change the location with the change of the work site, break the routine, and make production more liberalized.
| Model |
WGJY12－12A
Hydraulic model |
WGJD12－12A
General type |
YDWGJD12－12A
Mobile |
ZWGJD12－10A
Cold rolling bending hoop integrated machine |
WGJD16－16A
Large diameter |
| Single line machining capability(mm) |
Φ5-12 |
Φ5-12 |
Φ5-12 |
Φ5-12 |
Φ8-16 |
| Diameter of finished steel bar(mm) |
Φ5-12 |
Φ5-12 |
Φ5-12 |
Φ5-10 |
Φ8-16 |
| Maximum bending angle(° ) |
180 |
180 |
180 |
180 |
180 |
| Central axle diameter (mm) |
Φ25-32 |
Φ25-32 |
Φ25-32 |
Φ25-32 |
Φ25-50 |
| Maximum tractive speed(m/min) |
50－80 |
50-120 |
50-120 |
50-120 |
50-100 |
| Maximum bending speed(°/sec) |
0－600 |
0－1000 |
0－1000 |
0－1000 |
0－ 800 |
| Length accuracy(mm) |
±1.5 |
±1 |
±1 |
±1 |
±1 |
| Angle accuracy(°) |
±1 |
±1 |
±1 |
±1 |
±1 |
| Drive mode |
two-wheel drive |
10 drive wheels drive |
10 drive wheels drive |
10 drive wheels drive |
10 drive wheels drive |
| Average consumption of electricity(kw/h) |
4．5 |
4．5 |
4．5 |
4．5 |
15 |
| Equipment size(mm) |
2600*1800*1000 |
4500*2200*1400 |
4500*2200*1400 |
4500*2200*1400 |
6500*2200*1500 |
| Equipment power(kw) |
5.5 |
11 |
11 |
55 |
30 |
| Working environment temperature(℃) |
-5 --40 |
-5 --40 |
-5 --40 |
-5 --40 |
-5 --40 |
| Equipment weight（kg） |
800 |
2300 |
2800 |
8000 |
7000 |
